iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 Inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor Caddx Polar Vista Digital System


SKU: 1749131 Category:


Notice: becuase DJI Air Unit has been stopped produced, this item will comes with Caddx Polar Vista Digital System.

July 5th, 2021.

Notice: Get notification from iFlight,  All of their flight controllers come without Barometer.

Oct. 26th,2021.

Click here buy 2806.5 1800KV Speed Cruiser Motor Version

Click here buy Analog Version.


iFlight 7 inch Long-Range Drone that can carry bigger batteries to get the flight time to surf the swiss alps if you want!

Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control.

Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. 

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included).

Vertical and horizontal TBS CRSF antenna mounts included to cover you and your antenna dead ends.


– 6mm rigid arm design for more stiffness

– Top- and bottom battery mount option

– XING 2806.5 efficient wide stator motors

– GPS pre-installed for more safety at distance

– TPU Bottom Stand for Gopro Camera  (Camera and Camera Mount are NOT included)

– 360° TPU protection, DJI cam protection and antenna mounts

 DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted) 

– No props in view (DJI Air unit record in 1080p/60fps)

– Battery voltage LED status light (illuminated IF logo on the bottom)


Brand Name: iFlight

Model: Chimera7

Item Name: 320mm F7 6S 7 Inch Long Range FPV Racing Drone

Drone Wheelbase: 320mm

Optional Receiver Version: BNF-DJI  ( Built-in DJI Receiver)

                                            TBS CRSF Nano RX ( Built-in DJI Receiver & External TBS CRSF Nano Receiver)

Weight: 628.1 ( without Battery)

Flight Time: 17-19 Mins ( Take Example as 6S 4500mAh Lipo)

Chimera7 320mm Frame Kit

Wheelbase: 320mm

Main body dimension: 258*199mm

Bottom to top distance: 20mm

Arm thickness: 6mm

Bottom plate thickness: 3mm

Top plate thickness: 2mm

Upper(middle) plate thickness: 3mm

Camera plate thickness: 3mm (included TPU inserts)

SucceX-D F7 V2.1 TwinG Flight Controller

MCU: 216MHz STM32F722

Gyroscope: 2x ICM20689

Barometer: NO

Blackbox: 32MB

Betaflight OSD:  YES

BEC: 5V 2.5A / 9V 2.5A

Current sensor scale:  100

Inverter for SBUS input (UART2-RX)

Smartaudio & Tramp VTX protocol supported

Beeper pad: Yes

RSSI input pad: No

UARTs: 5

Motor outputs: 8

8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)

BLHeli32 Telemetry:RX5

Input voltage: recommended 2-6S, MAX 8S

Firmware Target:   IFLIGHT_F722_TWING

Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm

Dimensions:  36x36mm

Weight: 7.5g

USB type-C

SucceX 50A BLHeli_32 4in1 ESC

MCU: STM32F051

Up tp 48kHz PWM frequency

Capacitance: 470uF/50V

Current Sensor: Yes

Input: 2-6S LIPO

Constant: 50A / Burst: 60A

BlHeli32 telemetry: Yes


Supports up to Dshot1200, Proshot, Multishot 

Target: iFlight-BL32-4IN1

Weight: 14.4g

Size: 43x39mm (including the power pads)

Mounting Hole: 30.5×30.5mm/Φ3mm

XING 2806.5 1300KV Motor
Voltage: 2-6S
KV: 1300KV
Configuration: 12N14P
Bearing: NMB 11*5*5
Stator Diameter: 28
Stator Length: 6.5mm
Shaft Diameter: M5
No.of Cells(Lipo): 2-6S
Weight: 49.5g(with a short cable)
Motor mount hole: 19×19 φ3mm
Gemfan 7040 3-Blade Propeller

Quantity: 2 CW & 2 CCW

Color may vary

Optional Receiver Version

BNF-DJI Version: Built-in Vista Receiver ( On Caddx Polar Air Unit Module);

this version is compatible with DJI Remote Controller.

TBS CRSF Nano RX Version: Built-in DJI Receiver and has a external TBS CRSF Nano RX;

this version is compatible with DJI Remote Controller and Official TBS Radio Transmitter

Lipo Battery ( NOT Included) Recommend 5S 3000mAh above (slow cruising) or 6S 2500mAh above

Package Included:

1x Chimera7 Drone

1x TPU bottom stand incl. lock screw ( for Installing TPU Camera Mount)

1x Caddx Polar Air Unit ( Built Well on Drone)

1x 5.8G Albatross RP-SMA Antenna LHCP 150mm

2x Gemfan 7040 Propeller CW

2x Gemfan 7040 Propeller CCW

4x 20x250mm PU Leather Battery Strap (Color May Vary)


There are no reviews yet.

Be the first to review “iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 Inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor Caddx Polar Vista Digital System”

Your email address will not be published.