Sale!

iFlight Protek25 Pusher HD SucceX-D 20A F4 Whoop AIO V3.2 4S sub 250g 2.5 Inch FPV Racing Drone BNF w/ Caddx Nebula Nano Digital System GoCam PM G3 Sport Camera

£704.08

SKU: 1865580 Category:

Description

Notice: Get notification from iFlight, all of their flight controllers will come without baraometer.

Oct. 26th, 2021


Introduction:
After our big success with the iFlight ProTek series, we are now happy to announce another member. The ProTek25 Pusher!
Aiming for pilots looking for less weight but great durability, maximum performance but long distance and flight time.
A lot of thought was put into creating the best light pusher style 2.5inch quad on the market.
Cinematic as well as light freestyle is where this rig feels home. Cruising through the smallest gaps, chasing skateboards or just for fun in your backyard. 

– Durable aerodynamic PP body and carbon two-piece frame construction
Only 8 screws to detach the main plastic body from the carbon frame, motors and electronics. Quick, easy and cheap repair or customization!

– Reversed Pusher-style design for enhanced thrust and efficiency
Propeller thrust can travel without any disturbance of frame or wires; Increased flight time, less noise and less propwash!

– Powerful XING 1404 motors 
Lightweight, efficient and maximum power for it’s size; More than enough thrust for cruising and acromode flying without restriction!

– Less than 250g weight including 4S 650mAh battery and naked Hero8

Specification:

Frame Wheelbase: 108mm
Body Size: 76.3*76.3mm
Top plate thickness: 3mm
Top and bottom plate spacing: 21mm (aluminum standoff height)
SucceX-D Whoop AIO V3.2 FC AIO ESC

Size:41*41mm
Mounting pattern:25.5*25.5mm/φ3mm
Connector:Micro-USB
MCU:STM32F411
Gyro:MPU6000
OSD: IFLIGHT OSD (AT7456E)
Blackbox:16Mb Onboard Flash
BEC output:5V 2.5A 
Barometer:NO

Constant current:20A; 30A(Burst)
Input:2-6S
Current sensor:yes
BLHeli:BLHeli-S
ESC Telemetry:no
Target:IFLIGHT_F411_AIO
ESC Firmware:G-H-30 BLS

XING 1404 5500KV Motor Configuration: 9N12P
Shaft Diameter: 1.5mm
Motor Dimensions(Dia.*Len): Φ18.3×12.5mm
No.of Cells(Lipo): 2-4S
Max Continuous current(A): 11.8A
Max Continuous Power(W): 174.6W
Internal resistance: 0.28Ω
Weight: 8.5g(without cable)
Mounting pattern: 9*9*φ2mm
Bearing: 5*2*2.5mm
Nazgul 2525 propeller Quantity: 2 CW & 2 CCW

GoCam PM G3 4K Action Camera

(More Details, Click this Link)

Power supply range: 6V-27V (2S-6S lithium battery)
Lens aperture: F2.8
35mm Equivalent Focal Length: 16.4mm
Video resolution: 4000×3000 @ 24/25 / 30fps, 3840×2160 @ 24/25/30 / 60fps, 

2720×1530 @ 24/25/30/60 / 100fps, 1920×1080 @ 24/25/30/60/120 / 200fps
Video format: Insv (exported via APP or Studio) mp4
Firmware 1.2.16 and later firmware versions adjust the original INSV format to MP4 format, 

the file name prefix should be marked with ‘PRO _’, and the stream stabilization effect is exported via APP or Studio
Video encoding: H.264 / H.265
Video mode: normal video, HDR video, time-lapse photography, time-lapse mobile phone time-lapse video; Pro stabilization mode (use Insta360 / Studio app or supported plug-in export to achieve stream stabilization)
Maximum video bit rate: 100Mbps
Bluetooth: BLE4.0
Wi-Fi: 5G (standard range is about 2m)

Recommend Lipo Battery ( NOT Included)

iFlight Fullsend 4S 650mAh xt30 ( 3-5mins, for gopro naked; 5-7mins without)

iFlight Fullsend 4S 850mAh xt30 ( 5-7mins, for gopro naked; 6-8mins without)

Package Included:

pre-built and tested Quadcopter
1x iFlight ProTek25 Pusher Frame
1x Caddx Nebula Nano Digital HD System Kit

1x GoCam PM G3 Sport Camera
1x iFlight ipex/UFL LHCP 5.8g antenna
2x iFlight Nazgul 2525 propeller CW

2x iFlight Nazgul 2525 propeller CCW

1x 15x150mm battery strtap
1x 15x180mm battery strtap

Reviews

There are no reviews yet.

Be the first to review “iFlight Protek25 Pusher HD SucceX-D 20A F4 Whoop AIO V3.2 4S sub 250g 2.5 Inch FPV Racing Drone BNF w/ Caddx Nebula Nano Digital System GoCam PM G3 Sport Camera”

Your email address will not be published.